Sewage pump stations

Showing all 2 results

  • 0 out of 5

    PUMPING STATIONS SPIRO

    Our SPIRO wastewater pumping stations are designed for pumping rain and domestic wastewater. They can be used in pressurized sewage systems and as sewage collectors in non-pressurized sewers. The pumping stations can be installed under the road surface, as well as in a landscaped area without concreting.

    Pumping stations are designed for one or two pumps.

    Corps

    The pump housing is made of high-strength double-walled polyethylene profile. Transport loops allow the pumping station to be conveniently loaded and transported.

    The inner diameter of the pump housing: from 1200 to 2200 mm.

    Height: up to 8 meters.

    Pumps

    The pump type is selected depending on the nature and volume of the wastewater and the pumping distance and height. A wide range of pump types is available to adapt the pumping station to the required lifting capacity: pumps with a shredder, with a single-channel impeller or with a vortex impeller.

    Pumping components:

    • Ladder (stainless steel)
    • Service area (stainless steel, fibreglass)
    • Lid (PE or ductile iron)
    • Pressure piping (optional: stainless steel / PE / PVC)
    • Knife valve (malleable cast iron)
    • Check valve (ductile iron)
    • Guides (stainless steel)
    • Sediment bag (stainless steel)
    • Pump and basket chains (stainless steel)

     

  • 0 out of 5

    COMPACT PUMPING STATIONS ROTO

    We are importing the pump stations in plastic and concrete tanks, which are used to accumulate or pump-out industrial or domestic wastewater.

    Small sewage pump stations ROTO

    Eneka offers small sewage pumping stations installed in polyethylene tanks. They can be used in pressurized sewage systems and as waste collectors in non-pressurized channels, they can be installed under the road surface for pedestrians and cyclists, as well as under green spaces without using concrete. This type of pumping station is suitable for to one pump. Pumping station tank diameter is 850 mm, trenching depth is up to 4,5 meters. For comfortable entrance to the pumping station, the ladder is installed. Telescopic shaft is designed for adjusting the lid flush with the ground surface. The height can be continuously set in the range of 200 mm. Small pumping station could be used by pumps with or without cutter.

    Big sewage pump stations SPIRO

    Eneka offers large sewage pump pumping stations in double-wall polyethylene tanks. They can be used in pressurized sewage systems and as waste collectors in non-pressurized channels, they can be installed under the road surface for pedestrians and cyclists, as well as under green spaces without using concrete. This type of pumping station is suitable for one or two pumps. Pumping station tank diameter is from 1200 mm up to 2200 mm, installation depth is up to 8 meters. For a comfortable entrance to the pumping station, the ladder is installed. The telescopic shaft is designed for adjusting the lid flush with the ground surface. The height can be continuously set in the range of 200 mm. Small pumping stations could be used by pumps with or without cutter.